Yamaha HTR-5950 User Manual
Page 74
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SOUND FIELD PROGRAMS
Sound field pnrnmetcr
Feiituros
k’VOl. AJjiKK tTiC
'.
4
' ll'k- r^V^riV'IAlik'li Milind TIlO llll'j'-or ilk' Vllllkk tllC
stronger the reverberalioii becomes.
Control range: 0 to 100%
DIFiECT
CT i....iEUEL..
ii!.„ i....sEUEL..
FiR L..SEUEL..
EElEi i....i;EyEL..
2'Channel stereo direct. Bypasses the decoders and DSP processors of this unit for pure hi-fi
stereo sound when playing 2-channel analog sources.
Choices:
AUTO,
OFF
r'i'e
• The “AUTO" setting bypasses the decoders and DSP processors only when “BASS" and
“TREBLE" arc set to 0 clB (see page 32).
• When multi-channel signals (Dolby Digital and DTS) arc input, they arc dowrimixed to 2
channels and output from the front left and right speakers.
• The low-frequency signals inpul from the front left and right speakers are redirected to the
subwoofer in the following cases:
-■■LFE/BASS OUT" is set to “BOTH" (see page 79).
- "FRONT SP” is set to "SMALL” (see page 78) and “LFE/BASS OUT” is set to "SWFR”
(see page 79).
6-channel stereo center, surround left, surround right tuid surround back levels. Adjusts the
volume level of each channel in the 6-channel stereo mode.
Control range: 0 to 100(7
70