Yamaha HTR-5950 - Manual (Page 90)

SET MENU
OSD shift OSD SHiF'T
Use this feature to adjust the vertical position of the OSD.
Control range: -5 (upward) to +5 (downward)
Control step: 1
Initial setting: 0
• Pre.ss <! to raise the position of the OSD.
• Press )> to lower the position of the OSD.
Gray back GFiMV EiRCK
Use this feature to display a gray background in the OSD
when there is no video signal being input.
Choices:
AUTO, OFF
• Select “AUTO” to display a gray background in the
OSD when there is no video signal being input.
• Select “OFF” not to display any background in the
OSD.
Notes
• Depending on the video signals being input or the system
setting of your video monitor (NTSC or PAL), the OSD may he
displayed abnortnally. In such cases, set “GRAY BACK” to
■■OFF”.
• Even when “GRAY BACK” is set to “OFF”, the OSD may not
he displayed correctly depending on the comlitions of the
picture.
■ Memory guard BidliEiiriFc,' EiUiJEiCi
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choices:
OFF, ON
[<]/[>]JSei 0 ct
[ENTER]5Returri
• Select “OFF” to turn off the “MEMORY GUARD”
feature.
• Select “ON” to protect:
- DSP program parameters
- all “SET MENU” items
- all speaker levels
Note
When “MEMORY GUARD" is set to “ON", you cannot select
and adjusi any other “SET MENU" items.
■ Parameter Initialization INI
Use this feature to initialize the parameters of each sound
field program within a sound field program group. When
you initialize a sound field program group, all of the
parameter values within that group revert to their initial
factory settings.
Press the corresponding sound field program selector
buttons on the remote control to select the sound field
program that you want to initialize.
An asterisk (*) appears to the left of the sound field
program names that have been changed from their initial
factory settings.
Choices: STEREO, MUSIC, ENTERTAINMENT,
MOVIE THEATER, STANDARD
DnDL
STEliEO
*riU:5IC
ENTER! fllHHENl
MOUIE THEBTER
*:;TRt'lDRRD
Press DSP key
Notes
* You cannot automatically revert to the previous parameter
settings once you initialize a sound field program group.
* You cannot separately initialize individual sound field
programs.
* You cannot initialize any sound field program groups wdicn
"MEMORY GUARD" is set to "ON” (see page 86).
86