Yamaha HTR-5950 - Manual (Page 7)

GETTING STARTED
Supplied accessories
Check that you received all of the following parts.
Remote control
„ _
E М Й М C H 3
(3 Q O 3
© ( 3 e o ' :
;©Q CD O
s s s
o © © ■ O
• © ■ © O ©
0 0 0 © "
3b E3 Q S
3 5 o s C 3
Batteries (2)
(AA, R6, UM-3)
Indoor FM antenna
(U.S.A., Canada and
China models)
AM loop antenna
Indoor FM antenna
(Australia model)
Installing batteries in the remote control
1 Take off the battery compartment cover.
2 Insert the two supplied batteries
(AA, R6, UIVi-3) according to the polarity
markings (+ and -) on the inside of the
battery compartment.
3 Snap the battery compartment cover back
into piace.
Notes
• Change all oflhe batteries if you notice the following
conditions:
- the operation range of the remote control decreases.
- the TRANSMIT indicator does not flash or its light becomes
dim.
• Do not use an old battery together with a new one.
• Do not use different types of batteries (such as alkaline and
manganese balteries) logethcr. Read the packagiitg carefully as
Ihese dilTerenl lypcs of batleries may have the same shape and
color.
• If the batteries have leaked, dispose of them immediately. Avoid
touching the leaked material or lelliitg it come into contact with
clothing, etc. Cleat! the battery compartment thoroughly before
installing new‘ batteries.
• Do not thrmv away batteries with general house waste; dispose
of them correctly in accordance with your local regidations.
• If the remote control is without batteries for more than 2
tniitutcs, or if exhausted batteries remaiti in the remote cotitrol,
the contents of the memory may be cleared. When the memory
is cleared, insert new batteries, set up the remote control code
and program any acquired functions that may have been
cleared.