2 connect the ac adaptor to the player, Q connect the ac cord to the ac adaptor, Connect the plug of the ac cord to ac outlet – Panasonic DVDL50D User Manual
Page 26: For your reference, Powering the player using the battery pack, Supplied)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Powering the player using the battery pack
(supplied)
*1 Attach the battery pack to
the player (see page 25).
AC adaptor
(supplied)
AC cord
(supplied)
2
Connect the AC adaptor to
the player.
Q Connect the AC cord to the
AC adaptor.
^ Connect the plug of the AC
cord to AC outlet.
[Charging starts and
the CHARGE (CHG)
indicator lights in
red.]
To AC outlet
(AC 120 V, 60 Hz
in U.S.A. and Canada)
(Refer to “IMPORTANT
SAFETY INSTRUCTIONS”
on page 4.)
For your reference:
•The battery pack will not be charged
when the player is ON (during play or in
the stop mode). Charging will start when
the STOP (□) button is pressed and held
for approximately two seconds to set the
player to the standby mode.
•The CHARGE (CHG) indicator goes off
when charging is completed. Disconnect
the AC adaptor and the AC cord after
confirming the CHARGE (CHG) indicator
is OFF.
•in the case where charging fails to start,
refer to the notes on page 71.
26