Note, Connection – Panasonic DVDL50D User Manual
Page 68
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connection
(isjagfloi® (sB^OteO gEDÈBs) (sffiiíí^
te)oa3É)(ag№a06iaas6^^__________________________________________ ___
□ Concerning the audio output from the player’s audio input/output (optical digital
audio output) connector
Disc
Sound recording
format
Optical digital audio output from
connector
DVD
Dolby Digital (AC-3)
• Dolby Digital (AC-3) bitstream (1-5.Ich)
• PCM (48 kHz/16 bit) (2ch)
Linear PCM
(48/96 kHz 16/20/24 bit)
• Linear PCM (2ch)
(48 kHz sampling/16 bit only)
• No output®^
dts
•dts bitstream (1-5.Ich)
• No output
Video CD
MPEG 1
PCM (44.1 kHz sampling)
CD
Linear PCM
Linear PCM (44.1 kHz sampling)
Compressed sound converted to PCM will be output.
The type of audio output from the connector can be selected by “6 Digital Audio Output”
of the initial settings.
Note:
•Some dts decoders which do not support DVD-dts interface may not work properly with
the portable DVDA/ideo CD/CD player.
For your reference:
• If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro
Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks,
as well as from titles with the Dolby Surround mark.
Caution for the audio input/output (optical digital audio output)
connector:
•When connecting an amplifier (with an optical digital input connector) which
does not contain the Dolby Digital (AC-3) or dts decoder, be sure to select
“PCM” at “2 Dolby Digital” and “Off” at “3 dts” of the initial setting “6 Digital
Audio Output”. (See page 60.)
•Otherwise any attempt to play DVDs may cause such a high level of noise that it
may be harmful to your ears and damage your speakers.
•Video CDs and CDs can be played as they would normally be played.
68