S video output connector, Connection – Panasonic DVDL50D User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connection
• Ensure that this player and other equipment to be connected are set to the standby
mode or off, and disconnect the AC cords, before commencing connection.
• Do not block ventilation holes of any of the equipment and arrange them so that air can
circulate freely.
• Read through the instructions before connecting other equipment.
• Ensure that you observe the color coding when connecting audio and video cables.
•During DVD play, the TV volume may be at a lower level than during TV broadcasts, etc.
If this is the case, adjust the volume to the desired level.
•Select the appropriate screen type at the initial setting “5 TV Aspect” according to your
TV set (4:3/16;9). (See page 58.)
©gHiDS(siiloi]g)a°)a@^^
S video output connector:
Use the S video cable (optional) when connecting the player to a TV set equipped with an
S video input connector for the best picture clarity possible. When using the S video cable,
the yellow composite video plug need not be connected to the TV.
66