When “1 lpcm 96k->48k” is selected, 1 no (factory preset), 2 yes – Panasonic DVDL50D User Manual
Page 61: 1 bitstream (factory preset), 2 pcm, When "3 dts” is selected, 1 off (factory preset), 2 bitstream, For your reference, To return to the previous menu
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tilt the joystick
(A, T)
to select the preferred setting and press
SELECT.
□ When “1 LPCM 96k->48k” is selected
1 No (Factory preset):
• Digital audio of 48 kHz/16 bit is output during playback of the DVD recorded in
Linear PCM of 48 kHz.
• No digital audio is output during playback of the DVD recorded in Linear PCM of
96 kHz.
• However, audio will be output using the original audio recording system in case
of the DVD which has not been copyright-protected.
2 Yes:
During playback of the DVD recorded in Linear PCM of 48 kHz or 96 kHz, digital
audio converted to 48 kHz/16 bit is output.
(Digital output of PCM audio is restricted to 48 kHz/16 bit or below for copyright
protection.)
□ When “2 Dolby Digital” is selected
1 Bitstream (Factory preset):
Dolby Digital (AC-3) bitstream (1ch-5.1ch) is output during playback of the DVD
recorded in the Dolby Digital (AC-3).
Select this setting when the player is connected to the Dolby digital (AC-3) de
coder.
2 PCM:
Digital audio converted to PCM (2ch) of 48 kHz/16 bit is output during playback of
the DVD recorded in the Dolby Digital (AC-3).
□ When "3 dts” is selected
1 Off (Factory preset):
No digital audio is output during playback of the DVD recorded in dts.
2 Bitstream:
dts bitstream is output during playback of the DVD recorded in dts. Select this set
ting when the player is connected to the dts decoder.
Setting is finished and the screen illustrated in step 3 is displayed.
For your reference:
•See page 62 for the recommended set
ting of "6 Digital Audio Output”.
• In the case of the remote control, the
items can be selected using the cursor
buttons instead of the joystick.
□ To return to the previous
menu
Press RETURN.
□ To finish the initial settings
Press MENU at the initial settings
screen illustrated in step 1 on page 51.
(In the case of the remote control, press
ACTION or MENU.)
61