Panasonic KXFLM600NZ - Manual (Page 110)

Error Messages
Display
If the unit detects a problem, one or more of the following messages will appear on the display.
Display message Cause & Remedy
CALL SERVICE
'There is something wrong with the unit. Contact our service personnel.
CHANGE DRUM
'The drum unit is being worn out. Replace the drum unit and toner cartridge with
new ones as soon as possible (p. 123-125).
CHECK DOCUMENT
'The document is not fed into the unit properly. Reinsert the document.
CHECK DRUM
•The drum unit is not inserted properly. Reinsert it correctly (p. 22-24).
•The installed drum is worn out. Replace the drum unit with a new one.
CHECK MEMORY
'Memory (telephone numbers, parameters, etc.) has been erased. Re-program.
CHECK TONER
►The toner cartridge is not installed properly. Reinsert it correctly (p. 22-24).
DRUM LIFE OVER
•The drum unit has reached the end of its life expectancy. Replace the drum unit
and toner cartridge with new ones (p. 123-125).
FAILED PICK UP
•The unit cannot pick up the recording paper loaded in the paper cassette.
Remove the paper cassette and clear the jammed paper (p. 121).
FAX IN MEMORY
'The unit has a document in memory. See the other message instructions to print
out the document.
FAX MEMORY FULL
►Memory is full of received documents due to a lack of recording paper or a
recording paper jam etc. Install paper or clear the jammed paper.
'When performing memory transmission, the document being stored ‘exceeds the
memory capacity of the unit. Transmit the entire documents using manual or
automatic transmission.
EASY DIAL FULL
►There is no space to store new stations in the EASY DIAL directory. Edit or erase
unnecessary stations (p. 40).
MEMORY FULL
•When making a copy, the document being stored exceeds the memory capacity
of the unit. Press [ STOP ] to clear the message. Divide the documents and try
again.
MODEM ERROR
►There is something wrong with the modem circuit. Contact our service personnel.
NO FAX REPLY
►The other party’s fax machine is busy or has run out of recording paper. Try
again.
OUT OF PAPER
►The recording paper is not installed or the unit has run out of paper. Install paper
(p. 25).
PANEL OPEN
►The front panel is open. Close it.
PAPER JAMMED
•A recording paper jam occurred. Clear the jammed paper (p. 120, 121).
PC FAIL OR BUSY
►The fax function cannot be operated by the PC. The printer cable is not
connected correctly, or the software is not running on the PC {p. 78-81).
110 L