Setup, Example, Setting the date and time – Panasonic KXFLM600NZ User Manual
Page 29: Press istart/set/copy, Note, To correct a mistake, Recording paper size
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
r
Setup
Date and time, your logo and facsimile
telephone number
You should program the date and time, your logo and facsimile telephone number. This information will be
printed on each page transmitted from your unit.
Your logo
Your facsimile telephone number
Date and time
Example:
FROM : Panasonic Fax
FAX NO. : '1234567
Fax Correspondence
Feb, 26 1999 04:02PM PI
■D
(5
n
Q)
o'
3
5
6
7
8
1.SYSTEM SET UP
Setting the date and time
1
i2i
3
Press [MENU].
Display:
Press (#]. then (O] (T|-
SET DATE
Sc
TIME
PressISTART/SET/COPYl.
M:01/D:01/Y:99
^-------------------------
'—Cursor
Enter the correct month/day/year by selecting each
2 digits using the dial keypad.
Example: Aug. 10, 1999
Press (f)® ®®.
M: 08/D:10/Y:99
Press iSTART/SET/COPY],
TIME:
12:00AM
Enter the correct hour/minute by selecting 2 digits
for each using the dial keypad.
Press @ to select “AM” or “PM".
Example: 3:15PM
1. Press®®®®.
TIME:
03:15AM
2. Press (®| until “PM” is displayed.
TIME:
03:15PM
Press START/SET/COPY .
SETUP ITEM [
]
Press [MENU].
Note:
•To enter the year “2000” in step 4, press
®® for the correct year.
•You can enter the number by rotating
[EASY DIALI in steps 4 and 6. In this case,
press (B to move the cursor.
•The accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
• Press O'* (B to move the cursor to the
incorrect number, then make the correction.
• If you press [STOP] while programming, the
display will return to the previous one.
29