Sending faxes, Error correction mode setting, Connecting tone – Panasonic KXFLM600NZ User Manual
Page 55: Error correction mode setting connecting tone, Sending faxes error correction mode setting
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
т
Sending Faxes
Error correction mode setting
ECM stands for Error Correction Mode.
You can send documents even if there is static interference on the telephone line, provided both the
transmitting and receiving stations are ECM compatible.
ON: The unit functions with ECM communication {pre-selected setting).
OFF: The unit does not function with ECM communication.
1
2
3
4
5
6
Press (MENU).
Display:
Press
then ® ®.
1.SYSTEM SET UP
ECM SELECTION
Press [START/SET/COPY].
MODE=ON
ТА
Press or ® to select the desired setting.
Press [START/SET/COPY],
SETUP ITEM [
]
Press (MENU).
Connecting tone
This feature allows you to hear connecting tones, such as a fax tone, ring back tone or busy tone for several
seconds when you send a fax using the One-Touch Dial or EASY DIAL directory. This will tell you the status of
the other party’s machine.
If you hear a:
—Fax tone:
The other party’s machine is ready for reception.
—Ring back tone:
If this tone continues, the other party’s machine may not be a facsimile or may have run
out of paper. Check with the other party.
_____
—Busy tone:
The other party’s machine is busy. Let the unit continue redialing or press [STOP] and try
again later.
This feature is set to “ON" as a pre-selected setting. If this feature is not required, you can turn it off.
1
2
3
4
5
6
Press [MENU].
Display:
Press (5), then (7} ®.
1.SYSTEM SET UP
CONNECTING TONE
Press START/SET/COPY .
MODE=ON
ТА
Press [
t
] or ® to select the desired setting.
• If this feature is not required, select “OFF”.
Press START/SET/COPY .
SETUP ITEM
]
Press [MENU].
Note;
•The connecting tone volume cannot be
adjusted.
7^
fi}
о
■о
55