Panasonic KXFLM600NZ - Manual (Page 115)

Operations
Problems with PC software
General
Problem Cause & Remedy
I cannot send a fax from the PC at a
specified time.
•The date and time of the PC may be set incorrectly. Adjust it.
If it cannot be set correctly, consult your PC supplier.
The date and time that prints on the
top of each page sent from the PC is
incorrect.
•The date and time of the PC may be set incorrectly. Adjust it.
If it cannot be set correctly, consult your PC supplier.
I do not know how to move the
PANA LINK Main Panel, because
there is no title bar. • Point at an area with no buttons or parts and drag it where you
want to move.
I do not know whether the PANA
LINK Main Panel is active or not. •The brightness of the Main Panel Display shows you whether the
PANA LINK Main Panel is active or not.
<Active - bright, Non active - dark>
A quick tip does not appear when I
hold the mouse pointer over a button
in the PANA LINK Main Panel,
although I have set this to be
displayed. • If the PANA LINK Main Panel is non-active, the quick tip does not
appear. Check again, after making the PANA LINK Main Panel
active, by clicking anywhere on it.
The telephone number set in the
Main Panel Display disappears, and
the display shows, “For storing a
phone or fax number.”, explanation
of the button'and so on.
•The quick tip is displayed. Move the mouse cursor out of the PANA
LINK Main Panel. If you do not need quick tips, open the setup
dialogue and select OFF of the Quick Tip in the System tab.
The PANA LINK Main Panel
disappears. • Look in the task tray (in the task bar). If you do not find the PANA
LINK icon, it is closed. If you find the Icon, the PANA LINK Main
Panel is just minimized or reduced to an icon.
Doubie-click the icon in the task tray or open the menu by
right-clicking the fax icon then select Restore.
The PANA LINK Main Panel
disappears just after initializing. •The PANA LINK Main Panel is set to minimize when PANA LINK
starts. Double-click the icon in the task tray or open the menu by
right-clicking the fax icon, then select Restore.
If you do not want this to happen each time you start PANA LINK,
press the Setup button in the PANA LINK Main Panel, and check
off the Start minimized check box in the Program startup settings in
the System tab.
I want to delete all of the telephone
numbers set in the Main Panel
Display. •Press the Stop button.
I cannot recognize the last part of
the entry in the address list of the
Address Book or Communication
log, because that part ended with....
• Put a cursor on the line between the buttons, the cursor changes
shape and you can expand the area by dragging, or
double-clicking.
A cover page is sent whenever I
send a fax, though I do not want it to
be sent. •The setting of the cover page is “ON” by default. To deactivate the
setting, open the Setup dialogue box by pressing the Setup button,
and click the “Default Add cover page at every transmission”
check box in the Cover page tab.
I attempted to select a telephone
number from the Address Book for
the PANA LINK Main Panel, but I
selected a fax number by mistake. •You can change your selection in the PANA LINK Main Panel.
Double click the number you set in the Main Panel Display and the
fax number switches to the telephone number. You can also
right-click the entry to select a specific number.
X
o
■o
(continued)
115