One-touch dial, Press [directory program, For stations 1-4 – Panasonic KXFLM600NZ User Manual
Page 37: For stations 5-11, Helpful hint, Note, To keep a telephone number secret, To edit a stored station name and number
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
One-Touch Dial
Storing names and telephone numbers
in the One-Touch Dial
The unit’s memory allows you to use the One-Touch Dial for rapid access to your most frequently dialed
numbers. 22 stations are available.
•One-Touch Dial keys 1 to 4 can be used as One-Touch Dial keys (DIAL MODE) or as broadcast keys
(BROADCAST). These functions cannot be used at the same time. For the broadcast function, see pages
51 to 53.
1
4
5
Press [DIRECTORY PROGRAM!
Display:
PRESS STATION
OR USE EASYDIAL
For stations 1-4
Press one of the One-Touch Dial keys.
Select the following by pressing .
DIAL MODE
▼A
Press [ START/SET/COPYl to go to the next
prompt.
For stations 5-11
Press one of the One-Touch Dial keys.
For stations 12-22
Press [LOWER], then press one of the One-Touch
Dial keys.
Enter the station name, up to 10 characters,
following the instructions on page 31.
Example:
NAME=John
Press iSTART/SET/COPY).
Example:
<S02>=
Enter the telephone number up to 30 digits.
• If you want to enter a hyphen, press (HYPHEN]
(One-Touch Dial key 1).
»To program other stations, repeat steps 2 to 6.
Press [DIRECTORY PROGRAM] to exit the
program.
Helpful hint:
•You can confirm the stored items on the
display (p. 41), or on the telephone number
list (p. 129).
Note:
•A hyphen entered in a telephone number
counts as two digits.
To keep a telephone number
secret
Press (SECRET) (One-Touch Dial key 3) after
entering the telephone number in step 5.
•A secret number cannot be viewed if this is
set,
•The telephone number will not appear on the
telephone number list.
• Pressing [SECRET] does not count as a digit.
To edit a stored station name
and number
Enter the desired name in step 3.
Enter the desired number in step 5.
To erase a stored station name and number,
see page 40.
o
■D
O
3
(D
37