Using broadcast keys, Note, To cancel the broadcast setting – Panasonic KXFLM600NZ User Manual
Page 53: Broadcast report, Sending faxes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sending Faxes
Using BROADCAST keys
The document will be scanned and stored into memory when using a BROADCAST key. After transmission,
the stored document will be erased automatically.
The memory capacity is approx. 120 pages based on the CCITT No. 1 Test Chart in standard resolution.
For the CCITT No. 1 Test Chart, see page 131.
1
2
Insert the document FACE DOWN.
Press the preset [ BROADCAST ] key.
•The document will be fed into the unit and
scanned into memory. The unit will then transmit
the data to each station, calling each number
sequentially.
Note:
•While scanning, do not move the pages which have
already been ejected. A paper jam may occur. Allow
the scanning process to finish before viewing
documents.
• If you select the fine, super fine or half tone resolution,
the number of pages that the unit can transmit will
decrease.
• If one of the stations is busy or does not answer, the
station will be skipped. All skipped stations will be
redialed up to 2 times after all other stations have been
called.
fi)
o
■O
To cancel the broadcast setting
1. Press fSTOFl while the unit displays
“BROADCASTING”.
Display:
SEND CANCELED?
(
YES:
PRESS SET
2. Press (START/SET/COPY).
Broadcast report
After all of the transmissions have been completed, the unit will automatically print the following report.
Sample of a broadcast report:
BRO;\DCAST REPORT 1
NO.
OTHER FACSIMILE
START TIME
USAGE TIME
YOUR LOGO
YOUR FAX NO.
P.AGES
Jan. 10 1999 03:36PM
:Bill
:1234567
RESULT
01
Mike
Jan. 10 03;31PM
01 ■ 10
02
OK
02
Peter
Jan, 10 03:33PM
01'08
02
OK
03
Sam
Jan, 10 03:34PH
Ol'OS
02
OK
04
Kim
Jan, 10 03:35PM
Ol'lO
02
OK
TOTAL
004'37
008
53