Windy Nation Xantrex C Series Multifunction DC Controller - Manual (Page 75)

LED Status Indicator
975-0004-01-02 Rev D 55
LED Status Indicator
The multicolor LED on the base unit, or the optional CM
faceplate or CM/R remote, indicates the operating status of
the controller. A color-coded label is included on the cover of
the controller explaining the status LED’s indications.
• When in Charge Control mode, the LED will be green.
• When in Load Control mode, the LED will be red.
• When an Error Condition exists or the load has
disconnected, the LED will be orange.
• When battery equalization is in process, the LED
alternates between red and green.
Important: The green and red color of the LED only indicates
the particular operating mode and the battery voltage level. It
does not indicate whether the charging source is functioning
properly
Figure 3-2 C-Series Front Panel Label
Green Blink Charge Control Mode
Green Solid Battery Charged
Green
Red Blink Load Control Mode
Red Solid Battery Discharged
Red
C35
C40
C60
12/24 VDC
12/24/48 VDC
12/24 VDC
35 Amp Controller
40 Amp Controller
60 Amp Controller
/
Alternating - Equalization Enabled
5916-195th STREET NE ARLINGTON WASHINGTON 98223 TELEPHONE(360)435-8826 FAX(360)435-2229
STATUS
Orange Blink Slow Load Disconnected
Overload/Overtemp Orange Blink Fast
Charge / Load Controller
Multicolor LED indicator