360 Systems RC-220 Remote Controls User Manual
Page 10
RC-205/210/220 Remote Control Owner's Manual Second Edition March 1997 Page 8
4.
Press ENTER.
The display will show:
PRESET 1 A
UNASSIGNED
6.
Press ENTER again. All available PRESETs will be
assigned in sequential beginning with the Cut or Stack you
started with in Step 1.
Note:
The assignment process will continue until all available
PRESETs are assigned or all available Cuts or Stacks in the
Directory are assigned. The group assignment function does
not wrap around to the beginning of the Directory.
VIEWING PRESETS
You can examine the assigned PRESETS by entering the ASSIGN
PRESET or CLEAR PRESET mode.
1.
Select ASSIGN PRESET or CLEAR PRESET from the
UTILITY MENU.
2.
Press ENTER.
3.
Use the SELECT Arrows to scan PRESETS. The lower line
of the display shows ID and NAME (if labeled) of assigned
items.
4.
Press CANCEL (ESC) to exit the View Preset mode.
PLAYING PRESETS
1.
Turn Scroll Lock ON to play PRESETS.
2.
Press any assigned key (or Shift—, Ctrl—, or Alt—
combination) to play a PRESET.
Note:
The SETUP MENU'S RESTART MODE — IMMEDIATE or
ON COMPLETION — affects the playing of PRESETS.