360 Systems RC-220 Remote Controls - Manual (Page 20)

RC-205/210/220 Remote Control Owner's Manual Second Edition March 1997 Page
18
CREATING, STORING, AND PLAYING
LINEAR OR ROTATING STACKS
Linear Stacks and Rotating Stacks are stored in the DigiCart. You can
select and play these types of Stacks just like any Cut. You can even
assign a Linear Stack to a PRESET.
1. Press MAKE PLAYLIST. The Pause LED on the DigiCart
will illuminate.
2. Use the SELECT and POSITION Arrows or FIND operations
to choose a Cut or Stack.
3. Press ENTER to add the first Item to the Stack.
4. Repeat steps 2 and 3 as needed to add more selections.
The Play light will begin to blink, indicating more than one
Item for Follow-On Play. The display will show:
X.XXXX (Name)
X HH:MM:SS
Note: The number under ID counts the Items in the
QuickStack. The time is total Stack duration.
5. Press the STACK DIR button to save the Stack. The display
will prompt:
LINEAR
SELECT WITH ARROWS
6. Use the POSITION ARROWS to select LINEAR or
ROTATING.
7. Press ENTER to save the Stack. The display will read:
X.SXXX(L/R) NEWSTK_XXX
X HH:MM:SS
Note: The Stack Index will end with the letter "L" for
Linear Stacks. It will end with the letter "R" for
Rotating Stacks.
8. Use CHANGE NAME to give the Stack a new name.