360 Systems RC-220 Remote Controls - Manual (Page 21)

RC-205/210/220 Remote Control Owner's Manual Second Edition March 1997 Page
19
VIEWING A STORED STACK'S CONTENTS
You can check the contents of a Stack before you play it, or even examine it
while the Stack is playing. To view the items a Stored Stack, follow these
steps:
1. Select the Stack you wish to examine. The screen will show:
X X.XXXX (Name)
HH:MM:SS 48K AC-2
Note: The number in the upper left corner shows the
Item's position in the Stack. The rest of the
top line shows the Index number and Name
for the selected Stack. The bottom line of the
display shows the total time of the Stack.
2. Press VIEW PLAYLIST.
3. Use the SELECT Arrows to step through the STACK.
4. Press VIEW PLAYLIST to exit.
NOTE: VIEW PLAYLIST may be used to set the next Item for Play in a
ROTATING STACK.
VIEWING ITEMS IN A STACK WHILE PLAYING
1. Press VIEW PLAYLIST while the list is playing. The screen
will show:
X X.XXXX (Name)
(Name Playing) MM:SS
Note: The number in the upper left portion of the
screen shows the position of the Cut or Stack
displayed on the top line. A "1" indicates that
the item displayed in next in the sequence. A
"2" indicates that the item displayed is the
second-to-follow, and so on.
The bottom line of the display shows the name
and time information for the Cut currently
playing.
2. Use the SELECT Arrows to advance the upper line
information. You can look ahead to view Index and Name
information about all events yet to play in the Stack.