360 Systems RC-220 Remote Controls - Manual (Page 8)

RC-205/210/220 Remote Control Owner's Manual Second Edition March 1997 Page 6
PRESET OPERATIONS
The PRESET function lets you assign a Cut or Linear Stack to the RC-205
letter keys. When assigned, the selection will PLAY immediately when you
press the associated Hot Key, or PRESET. A-Z are 26 single-stroke Hot
Keys. Shift—, Alt— and Ctrl—A-Z may contain 78 additional PRESETS
instantly accessed by compound keystrokes.
The terms Hot Key and PRESET are used interchangeably in this manual.
There are certain important conditions that apply when working with
PRESETS:
• All Cuts (and Cuts contained in Stacks) assigned to
PRESETS must be recorded in the Dolby AC-2 format.
• All Cuts (and Cuts contained in Stacks) assigned to
PRESETS must be stored on the hard disk.
• PRESETS are subject to the currently selected RESTART
MODE under the SETUP MENU — IMMEDIATE or ON
COMPLETION.
• Your DigiCart must be equipped with 8 MB RAM in order to
use all 104 possible PRESETS. A standard unit with 4 MB
RAM allows access to 52 PRESETS.
• The RC-205's Scroll Lock must be ON to play PRESETS.
ASSIGNING A SINGLE PRESET
1. SELECT or FIND a Cut or Linear Stack on the hard disk.
2. Press UTILITY MENU (F1) and select the ASSIGN PRESET
function.
3. Press ENTER. The display will show:
PRESET 1 A
UNASSIGNED
4. Use the SELECT arrows to choose an alphabet letter for the
PRESET you wish to assign.