360 Systems RC-220 Remote Controls - Manual (Page 13)

RC-205/210/220 Remote Control Owner's Manual Second Edition March 1997 Page
11
7. Press ENTER to save the Stack. The display will read:
X.SXXX(L/R)
NEWSTK_XX
X
X
HH:MM:SS
Note: The Stack Index will end with the letter "L" for
Linear Stacks. It will end with the letter "R" for
Rotating Stacks.
8. Use CHANGE NAME to give the Stack a new name.
VIEWING A STACK'S CONTENTS
Press the STACK button (F4) to view a Stack's contents. Step through the
list using either the SELECT or POSITION ARROWS.
This process may be used to reset the next Item in a ROTATING STACK.
Press STACK (F4) again to exit.