360 Systems RC-220 Remote Controls - Manual (Page 22)

RC-205/210/220 Remote Control Owner's Manual Second Edition March 1997 Page
20
RC-220 Remote Control —
Full Function
The RC-220 is a full-featured Remote Control suitable for desk-top
production activities. It provides access to all DigiCart functions.
Expanded PRESET operations are available via the UTILITY MENU.
You can control up to four individual DigiCarts with the RC-220.
You can build and play Quickstacks using the MAKE PLAYLIST key.
You can access up to 16 Presets for instant playback of Cuts or Linear
Stacks.
FIND operations are available by ID number on the numeric keypad. The
STACK DIR key lends ready access to the Stack Directory.
Connecting the RC-220 to Your DigiCart(s)
The RC-220 Remote Control models uses the Serial Port 2 connector on
the rear panel of the DigiCart. Use the 9-pin interconnect cable assembly
that came with your RC-220 to connect it to the DigiCart.
DC power for the Remote Control is supplied from a small wall-mount DC
power supply. Note that this power supply should be plugged into AC
power near the DigiCart end of the cable. A short pig-tail cable with a
female coax connector exits from the 9-pin connector hood and is assigned
to receive power from the wall mount power supply.