360 Systems RC-220 Remote Controls User Manual
Page 30
RC-205/210/220 Remote Control Owner's Manual Second Edition March 1997 Page
28
5.
Press the STACK DIR button to save the Stack. The display
will prompt:
LINEAR
SELECT WITH ARROWS
6.
Use the POSITION ARROWS to select LINEAR or
ROTATING.
7.
Press ENTER to save the Stack. The display will read:
X.SXXX(L/R) NEWSTK_XXX
X
HH:MM:SS
Note:
The Stack Index will end with the letter "L" for
Linear Stacks. It will end with the letter "R" for
Rotating Stacks.
8.
Use CHANGE NAME to give the Stack a proper name. (This
is best done with the RC-205 Mini-Keyboard.)
VIEWING A STORED STACK'S CONTENTS
You can check the contents of a Stack before you play it, or even examine it
while the Stack is playing. To view the items a Stored Stack, follow these
steps:
1.
Select the Stack you wish to examine. The screen will show:
X X.XXXX
(Name)
HH:MM:SS
48K AC-2
Note:
The number in the upper left corner shows the
Item's position in the Stack. The rest of the
top line shows the Index number and Name
for the selected Stack. The bottom line of the
display shows the total time of the Stack.
2.
Press VIEW PLAYLIST.
3.
Use the SELECT Arrows to step through the STACK.
4.
Press VIEW PLAYLIST to exit.
Note:
VIEW PLAYLIST may be used to set the next Item for Play in a
ROTATING STACK.