360 Systems RC-220 Remote Controls - Manual (Page 19)

RC-205/210/220 Remote Control Owner's Manual Second Edition March 1997 Page
17
PLAYING PRESETS
1. Press any white PRESET key to play back an assigned
PRESET.
Note: The SETUP MENU'S RESTART MODE — IMMEDIATE or
ON COMPLETION — affects the playing of PRESETS.
2. To preview a PRESET, press the PAUSE button, then the
PRESET button of choice. The display will read its name. If
the selection is correct, push the PAUSE button again and
the cut will play immediately.
STACK OPERATIONS
CREATING AND PLAYING A QUICKSTACK
Quickstacks are not stored in the DigiCart; they are for one-time only use.
1. Press MAKE PLAYLIST. The Pause LED on the DigiCart
will illuminate.
2. Use the SELECT and POSITION Arrows or FIND operations
to choose a Cut or Stack.
3. Press ENTER to add the first Item to the QuickStack.
4. Repeat steps 2 and 3 as needed to add more selections.
The Play light will begin to blink, indicating more than one
Item for Follow-On Play. The display will show:
X.XXXX (Name)
X HH:MM:SS
Note: The number under ID counts the Items in the
QuickStack. The time is total QuickStack
duration.
5. Press MAKE PLAYLIST again to release PAUSE and begin
playback of the QuickStack.