360 Systems RC-220 Remote Controls - Manual (Page 11)

RC-205/210/220 Remote Control Owner's Manual Second Edition March 1997 Page 9
CLEARING PRESETS
1. Press UTILITY MENU (F1) and select CLEAR PRESET.
2. Press ENTER.
3. SELECT the PRESET you want to clear.
4. Press ENTER to CLEAR the PRESET.
Note: You may CLEAR multiple PRESETS in the current Directory
by entering the CLEAR PRESET mode from the DIRECTORY
Layer. Clearing begins with first the PRESET number shown
on the display.
STACK OPERATIONS
CREATING AND PLAYING A QUICKSTACK
Quickstacks are not stored in the DigiCart; they are for one-time only use.
1. Press PAUSE. The Pause LED on the DigiCart will
illuminate.
2. Use the SELECT and POSITION Arrows or FIND operations
to choose a Cut or Stack.
3. Press PLAY to add the first Item to the QuickStack.
(It is not necessary to press PLAY to add more cuts when
using the FIND function.)
4. Repeat steps 2 and 3 as needed to add more selections.
(When using the FIND function to select more cuts, it is not
necessary to press PLAY to enter them into the Stacks.)
The Play light will begin to blink, indicating more than one
Item for Follow-On Play. The display will show:
X.XXXX (Name)
X HH:MM:SS
Note: The number under ID counts the Items in the
QuickStack. The time is total QuickStack
duration.
5. Press PAUSE to Play the QuickStack.