Brookfield R/S CPS Rheometer - Manual (Page 36)

Brookfield Engineering Labs., Inc. Page 36 Manual No. M08-218-B0212
Maximum step duration: 3600 s
The instrument will automatically check the input. If there is a range error, “Range error”
would be displayed together with the allowable range.
The more time between two measuring points, the higher the accuracy
of the determined physical parameters!
The input procedure for start and end value, number of measurement points and step duration
is repeated for the next step. The procedure is repeated until all steps have been entered.
The program will then prompt the user for a program name.
Input program name:
NEW
Enter the name under which
the program is to be stored
For this example, we will use “TEST” (see Section VI.4: Input of Numerical Values and
Alphanumeric Texts). The instrument will prompt the user to store the Program with the
Name:
(2) TEST
<OK>=Storing
Press the
OK key to store the program.
If any other key besides
OK
is pressed, the entries are abandoned and
those parameters that existed before editing will be preserved.
VI.6.3 Utilities → Print Programs
This function will print the parameters of the defined programs in memory.
If the printer is not ready for operation when the “Print Programs” function is initiated,
the following error message will be displayed: