Elektron Analog Rytm - Manual (Page 18)

THE USER INTERFACE
10
QUICK PARAMETER EDITING
If the DATA ENTRY knob is pressed when it is turned parameters will be adjusted in larger increments. Quickly
sweep through a whole parameter range in this manner.
PARAMETER VALUE JUMP
Pressing [FUNCTION] while editing certain parameters will make the parameter values jump to appropriate
positions. The time of the Delay, for example, will jump between 16, 32, 64 and 128 and the oscillator tuning will
jump whole octaves.
QUICK SCROLLING
Scroll through menus using the LEVEL knob. Quick scrolling is possible on many menus. Press [FUNCTION] +
the [UP] or [DOWN] arrow keys to move the cursor one menu page at a time.
COPY, CLEAR AND PASTE
Copy, clear and paste commands are available in a lot of contexts. A copy operation is performed by pressing
[FUNCTION] + [REC]. A paste operation is performed by pressing [FUNCTION] + [STOP]. A clear operation is
performed by pressing [FUNCTION] + [PLAY]. Paste and clear operations can be undone by repeating the but-
ton press combination. See the different sections in the manual for more information on when these commands
are applicable.
THE NAMING SCREEN
The naming method is identical for the various naming situations that appear when kits, Sounds, songs, projects
et cetera are saved or renamed. This screen is also used for text searches.
The [LEFT] and [RIGHT] arrow keys are used to navigate between the letters. Turning the LEVEL knob or
pressing the [UP] or [DOWN] arrow keys cycles between the letters. [FUNCTION] + [NO/RELOAD] will erase
letters.
POP-UP NAMING
A convenient way of naming is to open a pop-up menu that shows all available letters, symbols and digits. When
on the NAMING screen, press the [FUNCTION] key.
Keep [FUNCTION] pressed and use the [ARROW] keys to highlight the character you want to insert. Once
there, release [FUNCTION] to insert the character.
• Copy, paste and clear commands are available on the naming screen.