Elektron Analog Rytm - Manual (Page 46)

THE SEQUENCER
38
ENV controls if the filter envelope will be trigged.
LFO controls if the LFO will be trigged.
QUANTIZATION
Access the menu by pressing [FUNCTION] + [TRIG SETUP]. Navigate the menu using the [UP]/[DOWN] arrow
keys or the LEVEL knob. Change settings with the [LEFT]/[RIGHT] arrow keys or any of the DATA ENTRY
knobs.
GLOBAL QUANTIZE will affect all micro timed trigs of all tracks. The higher the quantize
value, the more all micro timed trigs will be quantized. Range 0-127.
TRK QUANTIZE will affect all micro timed trigs of the active track. The higher the quantize
value, the more all micro timed trigs will be quantized. Range 0-127.
CLICK TRACK
The CLICK TRACK menu controls the internal metronome of Analog Rytm. Open the menu by pressing [FUNC-
TION] + [RETRIG]. Use the [UP]/[DOWN] arrow keys or the LEVEL knob to scroll through the list of settings.
Press [LEFT]/[RIGHT] or any of the DATA ENTRY knobs to change the highlighted setting.
ACTIVE activates/deactivates the metronome. It is also possible, outside of this menu, to
keep [FUNCTION] + [RETRIG] pressed for a second to toggle the metronome click on or off.
TIME SIG. NUM controls the note measure of the metronome time signature.
TIME SIG. DEN controls the beat measure of the metronome.
PREROLL controls for how many bars the metronome will sound before the sequencer starts
playing. This setting is only relevant when LIVE RECORDING mode is initiated.
VOLUME controls the volume of the click.
SCALE MENU
The length and timing of the pattern can be changed on this screen. Two modes exist in the SCALE menu. In
NORMAL mode all tracks share the same length. In ADVANCED mode each track can have different lengths.
Access the SCALE SETUP menu by pressing [FUNCTION] + [PAGE]. Use the [LEFT] and [RIGHT] arrow keys
to select between the available settings. Use the [UP] and [DOWN] keys to adjust the different settings and to
select between the two modes.