Elektron Analog Rytm - Manual (Page 69)

SETUP EXAMPLES
61
SETUP EXAMPLES
The Analog Rytm likes to play with other machines. Whether it uses its ability to sync and play with legacy
machines, plays its part among other Elektron machines or plays with incoming audio: Analog Rytm gets along
with other gear. Three examples are shown here.
ANALOG RYTM WITH A MONOPHONIC BASS MACHINE
The DIN sync capabilities of the Analog Rytm allows you to use gear from times gone by.
In this example, a legacy monophonic bass machine is used alongside the Analog Rytm. The bass machine
bassline is started, stopped and tempo controlled with the Analog Rytm.
1. Prepare a bassline pattern on the bass machine.
2. Connect the output of the bass machine to the mixer using a standard phone cable.
3. Connect the Analog Rytm outputs to the mixer using standard phone cables.
4. Connect the MIDI Out of the Analog Rytm to the SYNC IN of the bass machine using a DIN connector.
5. On the MIDI PORT CONFIGURATION menu, in the GLOBAL menu of the Analog Rytm, use the setting
DIN24 on the OUT PORT FUNCTIONALITY selector.
6. Prepare a rhythm on the Analog Rytm.
MAIN OUT TO MIXER MONO PHONE TO MIXER
DIN SYNC 24