Elektron Analog Rytm - Manual (Page 96)

A-2 Appendix D: MACHINES
BDFM (BASS DRUM FM)
TUN (Tune) sets the pitch of the first (modulated) oscillator.
Range (-64-+63).
SWT (Sweep Time) sets the pitch sweep time of the first (modu-
lated) oscillator. Range (0-127).
FMD (FM Decay Time) sets the decay time of the second (modu-
lating) oscillator and, consequently, the decay time of the FM
effect. Range (0-127).
DEC (Decay Time) sets the decay time of the first (modulated)
oscillator and, consequently, the whole drum sound. Range (0-
127).
FMT (FM Tune) sets the pitch of the second (modulating) oscilla-
tor. Range (-64-+63).
FMS (FM Sweep Time) sets the pitch sweep time of the second
(modulating) oscillator. Range (0-127).
FMA (FM Amount) sets the amount of frequency modulation
from the second oscillator to the first. Range (0-127).
LEV (Level) sets the overall volume level. Range (0-127).
SDFM (SNARE DRUM FM)
TUN (Tune) sets the pitch of the first (modulated) oscillator.
Range (-64-+63).
FMT (FM Tune) sets the pitch of the second (modulating) oscilla-
tor. Range (-64-+63).
FMD (FM Decay Time) sets the decay time of the second (modu-
lating) oscillator and, consequently, the decay time of the FM
effect. Range (0-127).
DEC (Decay Time) sets the decay time of the first (modulated)
oscillator and, consequently, the whole drum sound. Range (0-
127).
FMA (FM Amount) sets the amount of frequency modulation
from the second oscillator to the first. Range (0-127).
NOD (Noise Decay) sets the decay time of the noise. Range (0-
127).
NOL (Noise Level) sets the noise level. Range (0-127).
LEV (Level) sets the overall volume level. Range (0-127).
The MACHINES below can be used on the BD, SD, RS and CP tracks.