Elektron Analog Rytm - Manual (Page 64)

GLOBAL MENU
56
received. Press [YES/SAVE] to initiate the SysEx receive procedure. Analog Rytm will start listening to incoming
data. Press [NO/RELOAD] to stop listening.
ANYTHING will listen to and receive any viable SysEx data sent.
KIT will exclusively listen to and receive kit data.
• ACTIVE KIT will when receiving kit SysEx data replace currently active kit with the
received kit.
• KIT 01-128 will store a received kit to the selected kit slot. An asterisk at the end of
the kit name indicates the kit is not linked to any pattern.
SOUND POOL will store a received Sound to the selected slot of the Sound Pool of the active
project.
+DRIVE SOUND will store a received Sound to the selected slot of the +Drive Sound library.
The option ANYWHERE will place the Sound in the first free slot available. To the right of the
bank indication, the amount of free slots can be seen.
PATTERN will store a received pattern to the selected pattern slot. To the right of the pattern
slot, the name of the kit linked to the pattern is visible. An asterisk indicates the pattern is not
linked to a kit.
SONG will store a received song to the selected song slot.
GLOBAL will store a received global to the selected global slot.
• Initiate the SysEx send from the sending device after Analog Rytm has started listening to incom-
ing data.
• When receiving to a specific list position, any subsequent data will be received on the next posi-
tion, or positions, in the list.
• Analog Rytm can receive SysEx data at any time, regardless of the currently active menu. The
data will be loaded into the position specified when it was saved, or to the first free slot if unspec-
ified.
SYSTEM
The System menu contains Calibration, OS upgrade and Format +Drive options for the Analog Rytm.