Elektron Analog Rytm - Manual (Page 56)

GLOBAL MENU
48
GLOBAL MENU
The GLOBAL menu offers settings that affect Analog Rytm on a global level. Global sequencer, MIDI and track
routing settings are made here. Up to four Global slots are available, each with its own individual settings.
Access the menu by pressing [FUNCTION] + [TRACK]. Scroll the list by using [UP]/[DOWN] or the LEVEL
knob. Open a highlighted menu by pressing [YES/SAVE].
PROJECT
Here projects are managed. This menu is covered in the section “PROJECTS” on page 17.
SAMPLES
Manage your samples here. On the main screen, seen below, you can access one of two main directories, FAC-
TORY or INCOMING. In the FACTORY directory, several preset samples can be found in one of the ten subdi-
rectories. The INCOMING directory, on the other hand, is the default destination for samples sent to the Analog
Rytm +Drive storage via the C6 utility software. Press [YES/SAVE] to open a directory.
To open a subdirectory, simply highlight it using the [ARROW] keys and press [YES/SAVE]. To exit a directory,
select the item labelled “..” at the very top of the screen and press [YES/SAVE]. Do this repeatedly to return to
the top of the directory hierarchy. In order to discern directories from sample files, all directories, including the
directory exit row, “..”, are labelled with a (D) at the very end of the row. When browsing a directory in the +Drive,
a sample assigned to one of the 127 sample slots of the active project will have its slot number shown within
brackets, as seen below.
LOADING, UNLOADING OR REPLACING A SAMPLE
The following is an example of how to load one or several of the preset samples to the active project. First, open
the FACTORY directory. Second, open the PERCUSSION directory (the seventh item in the list). Here, highlight
the first sample, “Agogo High” and press [YES/SAVE] to tick it. Browse the list and tick a few other samples. Any
sample may be previewed (played back by the voice of the active track) by first highlighting it and then pressing