Elektron Analog Rytm - Manual (Page 72)

TECHNICAL INFORMATION
64
TECHNICAL INFORMATION
SPECIFICATIONS
THE SEQUENCER
12 drum tracks
1 FX track
Up to 64 steps per pattern
Individual track lengths
127 user samples (per project)
12 Scenes (per kit)
Trig mute, Accent, swing and slide functions
Micro timing
Parameter locks
Chromatic mode
Scene mode
Performance mode
Versatile and assignable Retrig
Live friendly Performance mode
Sound-per-step change
Instant kit, pattern and Sound reload
Full real-time control
STORAGE
128 projects (+Drive)
128 Kits (per project)
128 patterns (per project)
16 Songs (per project)
4096 sounds (+Drive Sound library)
128 Sounds (per project)
1GB sample storage (+Drive)
64 MB sample storage (per project)
127 user samples (per project)
MASTER EFFECTS
Analog Stereo Distortion
Analog Stereo Compressor
SEND EFFECTS
Delay
Reverb
8 x DRUM VOICE
Fully analog signal path
1 x analog percussion sound generator
1 × analog overdrive circuit
1 × 2-pole analog multi-mode filter
1 × analog stereo VCA
1 × filter envelope
1 × amp envelope
2 × effect sends
1 × assignable LFO
1 × dedicated LFO fade envelope
1 x 16-bit sample playback engine
1 x sample bitrate reduction
ELECTRICAL SPECIFICATIONS
Impedance balanced audio outputs:
Main outputs level: +15 dBu
Output impedance: 440
unbalanced
Headphones output:
Headphones out level: +15 dBu
Output impedance: 55
Unbalanced audio inputs:
Input level: +15 dBu maximum
Audio input impedance: 9 k
Individual Outputs:
Output level: +15 dBu
Output Impedance: 440
Unit power consumption: 14 W typical, 20 W maximum.
Recommended power supply: PSU-3 or similar 12V DC, 2A
HARDWARE
12 synthetic rubber, pressure sensitive, backlit pads
122x32 pixel backlit LCD screen
MIDI In/Out/Thru with DIN Sync out
2 x 1/4” impedance balanced audio out jacks
1 x 1/4” stereo audio in jack
1 x 1/4” stereo headphone jack
4 x 1/4” (TRS) paired individual track output jacks
48 kHz, 24-bit D/A and A/D converters
Flash-EEPROM upgradable operating system
Electrically isolated multi-functional USB 2.0 port
PHYSICAL SPECIFICATIONS
Sturdy steel casing
Dimensions: W340 x D176 x H63mm (13.4” x 6.9” x 2.5”)
(including power switch, knobs and feet)
Weight: approximately 2.4 kg (5.3 lbs)



