Elektron Monomachine - Manual (Page 103)

GLOBAL SETTINGS
95
sound is no longer affected for that particular axis. This is because the maximal parameter
value already has been reached.
FILE
From here you can save and load Monomachine data and settings. You can handle data for
patterns, songs, kits and global slots individually or in combinations. You can save the
whole memory and restore the state of the unit at a later time. The DIGIPRO MANAGER is
also found here. It is used to manage your waveforms.
SYSEX SEND
This menu is used for sending all or part of the patterns, songs, kits and global slots.
1. Select FILE in the GLOBAL menu. Then select SYSEX SEND using the [ARROW] keys
and press [ENTER/YES].
Use the [RIGHT] and [LEFT] keys to move between the tabs. Use the [UP] and [DOWN]
keys to change the parameters. The LEVEL knob can also be used for setting the ranges.
SELECTION offers the following transfer options:
• ALL - All Monomachine data (patterns, kits and global data) will be sent. This can be
used for making a full backup of all the Monomachine memory data. No RANGE param-
eters are available.