Elektron Monomachine - Manual (Page 112)

GLOBAL SETTINGS
104
1. When in the DIGIPRO MGR, choose ERASE and then press the [RIGHT] arrow key to
move the focus to the POS NAME column. Choose the waveform you want to erase by
pressing the [UP] and [DOWN] keys.
2. Press [ENTER/YES]. A prompt will appear on the screen as seen below.
3. Press [ENTER/YES] to erase the waveform. To cancel the erase operation, press [EXIT/
NO].
RENAME WAVEFORMS
It is possible to rename the user waveforms. Names can have up to four characters. It is
not possible to rename the factory waveforms.
Follow the instructions below to rename a waveform.
1. When in the DIGIPRO MGR, choose RENAME and then press the [RIGHT] arrow key to
move the focus to the POS NAME column. Choose the waveform you want to rename
by pressing the [UP] and [DOWN] keys.
2. Press [ENTER/YES]. A window where you will be able to rename the waveform will
appear. Use the LEVEL knob or the [UP] and [DOWN] keys to cycle through the letters.
The [LEFT] and [RIGHT] keys move the cursor backwards and forwards on the line.
3. When satisified with the name, press [ENTER/YES] to rename the waveform.