Snapshot manager (+drive units only), Snapshot manager (+drive units only) -106 – Elektron Monomachine User Manual
Page 114
GLOBAL SETTINGS
106
•
LOAD means that all pattern, kit, song and global data of the Snapshot loaded to the
Battery Backed Memory will be overwritten when a new Snapshot is loaded. If this option
is chosen, the QUICK MODE menu will be titled LOAD SNAPSHOT.
FORMAT DRIVE makes it possible to erase everything on the +Drive. If you want to format
the +Drive press the [ENTER/YES] key. A prompt will appear. Press [ENTER/YES] to for-
mat the +Drive. Press [EXIT/NO] to cancel the operation.
•
Note that formatting the +Drive will not erase the Snapshot loaded in the Battery
Backed Memory. However, any user waveforms in the Digibank loaded in the DSP
will be cleared immediately and replaced with factory waveforms.
•
At the bottom of the +DRIVE SETTINGS menu you will see how many Snapshots
and Digibanks your unit contains.
•
The NEGOTIATE setting in the TURBO menu will just like the QUICK MODE setting
stay the same no matter what Snapshot is loaded.
SNAPSHOT MANAGER (+DRIVE UNITS ONLY)
In this menu you can load, save, rename and erase Snapshots.
1.
Select the FILE row in the GLOBAL EDIT menu. Then select SNAPSHOTS and press
[ENTER/YES].
In the MODE column you select which action you want to perform.
LOAD will load one of the 128 available Snapshots.