Elektron Monomachine - Manual (Page 97)

GLOBAL SETTINGS
89
ROUTING
In this menu one of three audio routing selections can be set.
1. Select the AUDIO in the GLOBAL menu. Then select ROUTING using the [ARROW]
keys and press [ENTER/YES].
Use [UP] and [DOWN] keys to move the focus, and confirm with [ENTER/YES].
3xSTEREO is the default configuration, where the three internal stereo mix buses AB, CD
and EF are sent to the audio outputs A/B, C/D and E/F.
3xSTEREO + AB=MIX, has the same function as mode 3xSTEREO described above, but
the CD and EF buses are mixed also to the A/B outputs, for users only using the A/B main
stereo outputs, or headphones.
6xMONO mixes the stereo output of each of the six Monomachine tracks to mono. The
tracks are then sent directly to each of the audio outputs. Track 1 is sent to output A, Track
2 to output B and so on.
Please see section “MONOMACHINE ROUTING”, on page 81 for detailed information on
the Monomachine routing possibilities.
CONTROL
The Monomachine is designed to fit well into a MIDI environment. It is well equipped for
controlling other units using the MIDI sequencer, the MIDI real-time messages (Timing
clock, Start, Stop) and Song Pointer Position. It is also ready for a large number of control
methods to fit in a wide range of environments. The CONTROL menu is also where you set
the resolution of the encoders and the keyboard velocity response of the SFX-6 keyboard.
MIDI CHANNELS
Here the MIDI channel setup of the Monomachine is found.
Select CONTROL in the GLOBAL menu. Then select MIDI CHANLS using the [ARROW]
keys and press [ENTER/YES].