Elektron Monomachine - Manual (Page 88)

THE SONG MODE
80
1. Reach it by pressing [ENTER/YES] in the SONG EXTRA column in the EDIT SONG
window..
From here you can set the mutes for the song row. Use the [TRIG] keys 1 to 6 to set the
mute mask for the internal tracks, and [TRIG] keys 9 to 14 for the MIDI sequencer tracks. A
muted track will be displayed as a “-” sign.
Tempo adjustments can be programmed by setting a BPM value. Use the LEVEL knob to
update the BPM setting. You need to start by increasing the assigned BPM-value. To
remove the BPM value, turn the LEVEL knob so that the lowest possible value is selected.
You will then see “-” printed in the BPM tab.
• If no BPM value is set for the step, the current tempo is used. If a song does not
have any tempo settings, the current tempo is used for the full song.
• The global mutes applies as well as the song row mutes. Tracks muted in the glo-
bal mutes (as described in section “THE MUTE MODE”, on page 67) or the song
row mutes will be muted on that row.
• If a song row mute mask is set for the row, it is indicated in the XTRA column with
a bold “M”. If a song row BPM value is set, it is indicated with a bold “B”.