Holtgreven Ohaus Defender Series Bench Scales - Manual (Page 29)

7000 Series Indicators EN-27
COUNt
PC AUTO OPT
ON
PC.OPt
OFF
mMOdE
PERCENT
ON
PErCNt
OFF
mMOdE
DYNAMIC
AUTO
SEMI AUTO
MANUAL
dYNAmM
OFF
60
LEVEL
0
mMOdE
CHECKWEIGH
PCS
WEIGH
CHECK
OFF
mMOdE
END MODE
3.6.4 Parts Counting Optimization
When the Parts Counting mode is turned ON, Parts Counting Optimization can be used to
automatically adjust the average piece weight (APW). Each time a quantity greater than 1x or less
then 3x the previous quantity is placed on the scale, the APW is adjusted.
OFF = disabled
ON = enabled
3.6.5 Percent Weighing Mode
Set the status.
OFF = disabled
ON = enabled
3.6.6 Dynamic Weighing Mode
Set the status.
OFF = disabled
MANUAL = averaging and resetting are manually initiated by pressing the
FUNCTION button.
SEMI AUTO = averaging is automatically initiated when the display exceeds 5
graduations; resetting is manually initiated by pressing the
FUNCTION
button.
AUTO = averaging is automatically initiated when the display exceeds 5
graduations; resetting is automatically initiated when the display returns
to within 5 graduations of zero.
If MANUAL, SEMI AUTO, or AUTO is selected, the current averaging time is displayed.
Set the averaging time.
Settings of 0 to 60 seconds are available.
NOTE: Select 0 seconds to enable the Display Hold function. In this case, the first stable weight will
be held on the display.
3.6.7 Check Weighing Mode
Set the status.
OFF = disabled
WEIGH = enabled for checking items by weight.
PCS = enabled for checking items by count.
3.6.8 End Mode
Advance to the next menu or return to the top of the current menu.