Holtgreven Ohaus Defender Series Bench Scales - Manual (Page 38)

EN-36 7000 Series Indicators
19200
9600
4800
2400
1200
PrINt1
LIST
YES
PrINt1
END PRINT1
mMENU
COM1
COmM1
RESET
YES
rESEt
NO
COmM 1
BAUD
600
bAUd
300
8 NONE
7 NONE
COmM 1
PARITY
7 ODD
PArItY
7 EVEN
3.9.6 List
Print the specified data.
NO = do not print.
YES = print the menu settings.
3.9.7 End Print1, End Print2
Advance to the next menu or return to the top of the current menu.
3.10 COM1, COM2 Menus
Enter this menu to define communication parameters.
NOTE: The COM2 menu is only available if an optional RS232 PC Board or RS485/RS422 PC Board
is installed.
3.10.1 Reset
Reset the COM menus to the factory defaults. Factory default settings are shown in bold.
NO = not reset
YES = reset
3.10.2 Baud
Set the baud rate.
300 = 300 bps
600 = 600 bps
1200 = 1200 bps
2400 = 2400 bps
4800 = 4800 bps
9600 = 9600 bps
19200 = 19200 bps
3.10.3 Parity
Set the data bits and parity.
7 EVEN = 7 data bits, even parity
7 ODD = 7 data bits, odd parity
7 NONE = 7 data bits, no parity
8 NONE = 8 data bits, no parity
LISt
NO