Holtgreven Ohaus Defender Series Bench Scales - Manual (Page 56)

EN-54 7000 Series Indicators
PC003
SAVE RECORD?
P.tArE
0.000 KG
P.tArE
1.000 KG
*
1.000
kg
0.000 KG
*
1.000
kg
1.000 KG
StAtS
kg
N 1
StAtS
kg
TOT 1.000
StAtS
kg
STD 0.000
StAtS
kg
MIN 1.000
StAtS
kg
MAX 1.000
StAtS
kg
DIFF 0.000
StAtS
kg
AVG 1.000
StAtS
kg
CLEAR STATS?
*
1.000
kg
0.000 KG
If desired, edit the displayed data value using the keypad. Then press the Yes button.
After all data types have been viewed, press the
Yes button to save the changes.
4.11 Accumulation and Statistics
The Accumulation feature enables manual or automatic totalizing of displayed values. Statistical data
is stored in memory for review and printing.
NOTES: ACCUMULATE must be set to MANUAL or AUTO in the SETUP menu.
The Accumulation function is available in Weighing, Counting, Dynamic and Check Weighing
modes. Accumulation data is stored separately for each mode.
To include the statistics data when printing, INFORMATION must be set to ON in the PRINT
CONTENT menu.
4.11.1 Accumulating Displayed Values
With ACCUMULATE set to MANUAL, place the item on the scale and press the
FUNCTION button to
accumulate the displayed value.
With ACCUMULATE set to AUTO, place the item on the scale. The displayed value is accumulated
automatically.
The accumulated value is displayed on the second line.
4.11.2 Viewing Statistics Data
To view the statistics data, press the
INFO button. The following statistics data will be displayed
momentarily: number of weighings, total, average, standard deviation, minimum, maximum, and
difference.
4.11.3 Clearing Statistics Data
To clear the accumulation value and statistics data, press the
CLR button while the statistics
information is being displayed. When the display shows CLEAR STATS?, press the Yes button to
clear the statistics data or press the No button to keep the statistics data.