Holtgreven Ohaus Defender Series Bench Scales - Manual (Page 49)

7000 Series Indicators EN-47
*
0
0.000
kg
PLACE 20 OR
0.012
kg
ENTER APW
0
Pcs
0.000 KG
*
0
0.000
kg
ENTER APW
*
0
1.476
kg
REMOVE 20 OR
COUNt
Pcs
CLEAR APW?
*
0
0.000
kg
PLACE 10 OR
*
0
0.000
kg
PLACE TOTAL
*
0
1.476
kg
REMOVE 10 OR
123
Pcs
1.476 KG
123
Pcs
1.476 KG
1.200
kg
PLACE 10 OR
NOTE: To change the specified number of pieces, repeatedly press the No button. The display will
step through the alternative sample sizes: PLACE 5, PLACE 10, PLACE 20, PLACE 50 and PLACE
100.
To establish the APW using parts, place the specified quantity of parts on the scale and press the
FUNCTION button.
To establish the APW using a numeric value, enter the value using the keypad, then press the
FUNCTION button.
Positive Counting
After defining the APW, place the items to be counted on the scale and read the value on the display.
The number of pieces is displayed on the top line and the actual weight is displayed on the bottom
line.
Defining the Average Piece Weight for Negative Counting
The average piece weight (APW) is established by removing a specified quantity from a full
container on the scale.
When the
Mode button is released, CLEAR APW? is displayed. Press the No button to use the stored
APW or press the Yes button to establish a new APW.
When establishing a new APW, the display alternates between PLACE 10 OR and ENTER APW.
To enable negative counting, press and hold the
+/- button until the display shows PLACE TOTAL.
To establish the APW, place the entire quantity of parts on the scale and press the
FUNCTION
button.
Then remove the specified quantity of parts from the scale and press the
FUNCTION button.
NOTE: To change the specified number of pieces, repeatedly press the No button. The display will
step through the alternative sample sizes: PLACE 5, PLACE 10, PLACE 20, PLACE 50 and PLACE
100.
NOTE: At this stage, it is still possible to establish the APW by entering the value using the keypad
and pressing the
FUNCTION button.
Negative Counting
After defining the APW, read the value on the display. The number of pieces is displayed on the top
line and the actual weight is displayed on the bottom line.