Holtgreven Ohaus Defender Series Bench Scales - Manual (Page 42)

EN-40 7000 Series Indicators
mMENU
MENU LOCK
L.mMENU
RESET
YES
rESEt
NO
L.mMENU
LOCK CAL
ON
L.CAL
OFF
L.mMENU
LOCK SETUP
ON
L.SEtUP
OFF
L.mMENU
LOCK MODE
ON
L.mMOdE
OFF
L.mMENU
LOCK UNIT
ON
L.UNIt
OFF
L.mMENU
LOCK READOUT
ON
L.rEAd
OFF
3.12 Menu Lock Menu
Use this menu to prevent unauthorized changes to menu settings. When the security switch is set to
ON, the locked menus can be viewed but not changed.
3.12.1 Reset
Reset the Menu Lock menu to the factory defaults. Factory default settings are shown in bold.
NO = not reset
YES = reset
NOTE: Settings for Legal for Trade controlled menu items are not reset.
3.12.2 Lock Calibration
Set the status.
OFF = the Calibration menu is not locked.
ON = the Calibration menu is locked.
3.12.3 Lock Setup
Set the status.
OFF = the Setup menu is not locked.
ON = the Setup menu is locked.
3.12.4 Lock Readout
Set the status.
OFF = the Readout menu is not locked.
ON = the Readout menu is locked.
3.12.5 Lock Mode
Set the status.
OFF = the Mode menu is not locked.
ON = the Mode menu is locked.
3.12.6 Lock Unit
Set the status.
OFF = the Unit menu is not locked.
ON = the Unit menu is locked.