Configuration procedures, Configuration procedures -2 – KEYENCE DL-EP1 User Manual

Page 18

Advertising
background image

2-2

2

Connec

tion and

Con

fig

ur

ati

on

- EtherNet/IP Compatible Network Unit DL-EP1 User’s Manual (SK-1000) -

2-1

Procedures from Installation before Using the DL-EP1 to Configuration

This section describes the procedures before you use the DL-EP1.

The above configurations enable communication.
For the outline of scanner side configuration for communication with an Allen-Bradley
scanner, refer to

"Procedures for Communicating with an Allen-Bradley

ControlLogix PLC" (Page 5-6).

Configuration Procedures

1. Installation and Connection to Sensor Amplifiers

Connecting the DL-EP1 to sensor amplifiers (Page 2-4)

Assigning ID Numbers (Page 2-5)

2. Wiring

3. Configuring Communication with the DL-EP1

4. Configuring Communication with the Scanner

Connecting a communication cable (Page 2-6)

Setting the IP address (Page 2-8)

Setting the IP address (Page 2-11)

Registering the device profile of the DL-EP1 (Page 2-11)

Configuring the Scanner Side

(Refer to each scanner manual.)

Advertising