KEYENCE DL-EP1 - Manual (Page 48)

- EtherNet/IP Compatible Network Unit DL-EP1 User’s Manual (SK-1000) -
3-3 Cyclic communication
3-20
3
Commu
nic
ati
ng
wi
th t
he SK-1000
S
eries
Reading judgment values (P.V. values) from sensor amplifiers
Judgment values (P.V. values) are read from the IN area to which the ID number of
each sensor amplifier is assigned.
Device assignments: "Monitor Data (84 Words (168 Bytes)) Assembly Instance
(Instance ID): 64H" (Page 3-9)
This example shows how to read the judgment values from the sensor amplifiers
ID01, ID02, and ID03.
(1)When the judgment value of a sensor amplifier is updated, the new judgment
value is entered into the IN area via cyclic communication.
If the judgment value is correct, the parameter range is -99.997 to +99.998.
If the current value is over range, under range, or invalid, the previous value is
retained without updating the current value. Use the value with the judgment
value property.
(2)The properties of the judgment value (Current Value n Over Range (each bit of IN
area [6]), Current Value n Under Range (each bit of IN area [8]), and Current
Value n Invalid (each bit of IN area [10]) are entered. If the judgment value of a
sensor amplifier is "over", "under," or "invalid," the bit corresponding to the ID
number of that sensor amplifier is set to 1.
*For the SK-1000 Series, the judgment value is stored in the current value 0.
PLC (2)
Judgment value property
Each bit of IN [6, 8,10]
Judgment value of ID 01 1234 4567 6789
IN area [48 to 51]
Judgment value of ID 02 2345 5678 7890
IN area [52 to 55]
Judgment value of ID 03 3456 8901
IN area [56 to 59]
Sensor amplifier
Judgment value of ID 01 1234 4567 6789
Judgment value of ID 02 2345 5678 7890
Judgment value of ID 03 3456 8901
(1)