Acura 2007 RL - Owner's Manual - Manual (Page 135)

While the multi-information display
is in the CUSTOMIZE GROUP
screen, select WIPER SETUP by
pressing the INFO ( / ) button,
then press the SEL/RESET button.
The changeable setting under
WIPER SETUP is called WIPER
ACTION. To get into WIPER
ACTION, do this:
Each time you press the INFO ( /
) button, the screen changes as
shown in the illustration. Press the
INFO ( / ) button until you see
WIPER ACTION, then press the
SEL/RESET button to enter your
selection.
CONTINUED
Wiper Setup
Multi-Information Display
Ins
tr
u
m
e
n
ts
a
n
d
Con
tr
o
ls
133
Press the or button.
Press the SEL/RESET button.
see page 134
Main Menu Table of Contents