Instrument panel indicators – Acura 2007 RL - Owner's Manual User Manual

Page 69

Advertising
background image

Pull to the side of the road when it is
safe, shift to Park, and let the engine
idle until the indicator goes out.

This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. If this indicator comes on at
any other time, there is a problem in
the SH-AWD system. You will also
see a ‘‘CHECK SH-AWD SYSTEM’’
message on the multi-information
display (see page ). Take your
vehicle to a dealer to have it checked.
For more information, see page

.

If it comes on while driving, it
indicates the differential
temperature is too high.
You will also see a ‘‘SH-AWD DIFF
TEMP. HIGH’’ message on the
multi-information display (see page

).

If the indicator blinks while driving,
pull to the side of the road when it is
safe, shift to Park, and let the engine
idle until the indicator goes out.

This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position.

You will also see a ‘‘CHECK TIRE
PRESSURE’’ message on the multi-
information display (see page ).

If it comes on while driving, it
indicates that one or more of your
vehicle’s tires are extremely low on
pressure.

Check the tire pressure monitor on
the multi-information display and
determine the cause (see page ).

If this happens, pull to the side of the
road when it is safe, check which tire
has lost pressure on the multi-
information display, and determine
the cause. If it is because of a flat tire,
have the flat tire repaired as soon as
possible. If two or more tires are
underinflated, call a professional
towing service. For more
information, see page .

Your vehicle has Michelin PAX tires.
Repair or replacement of PAX tires
must be done by an Acura dealer or
an authorized Michelin PAX system
dealer. For more information, see
page

.

78

78

79

350

455

422

367

If equipped

SH-AWD Indicator

Low Tire Pressure
Indicator

Instrument Panel Indicators

Inst

ru

m

e

nt
s

a

nd

Cont

ro

ls

67

Continuing to drive with the SH-AWD
indicator blinking may cause serious
damage to the system.

Main Menu

Table of Contents

Advertising