Acura 2007 RL - Owner's Manual - Manual (Page 388)

And also, the percentage ‘‘0’’ keeps
blinking on the display.
If the indicated required service is
not done and the remaining engine
oil life becomes 0 %, the multi-
information display will show a
‘‘SERVICE PAST DUE’’ message,
the total mileage after the remaining
oil life became 0 %, and the
maintenance item code(s).
This message is displayed when you
drive over 10 miles (for U.S. models)
or 10 km (for Canadian models)
after seeing the 0 % message.
Immediately have the service
performed, and make sure to reset
the display as previously described.
The message will be canceled if the
or button on the steering wheel
is pressed. Press the or button
to see the message again.
This particular message is displayed
when the mileage after the engine oil
life became 0 % reaches 10 miles (for
U.S. models)/10 km (for Canadian
models).
The maximum total mileage shown
with this message is ‘‘9999 mile’’ (for
U.S. models) or ‘‘9999 km’’ (for
Canadian models).
Maintenance Minder
386
TOTAL PAST DUE MILEAGE
U.S.
CANADA
MAINTENANCE ITEM CODE (S)
Main Menu Table of Contents