Turn signals and headlights – Acura 2007 RL - Owner's Manual User Manual

Page 142

Advertising
background image

Push down on the

lever to signal a left turn and up to
signal a right turn. To signal a lane
change, push lightly on the lever,
and hold it. The lever will return to
center when you release it or
complete a turn.

Turn signal
Off
Parking and indicator lights
AUTO
Headlights on
High beams
Flash high beams
Fog lights off
Fog lights on

The rotating switch

on the left lever controls the lights.
Turning this switch to the ‘‘ ’’
position turns on the parking lights,
taillights, instrument panel lights,
side-marker lights, and rear license
plate lights.

Turning the switch to the ‘‘ ’’
position turns on the headlights. If
you leave the lights on with the
ignition switch released after turned
to the LOCK (0) position or when
the built-in key is removed from the
ignition switch, you will hear a
reminder chime when you open the
driver’s door.

When the light switch is in the
‘‘ ’’ or ‘‘ ’’ position, the
lights on indicator comes on as a
reminder. This indicator stays on if
you leave the light switch on and
turn the ignition switch to the
ACCESSORY (I) or the LOCK (0)
position.

To switch from low

beams to high beams, push the left
lever forward until you hear a click.
The blue high beam indicator will
come on (see page

). Pull it back

to return to low beams. To flash the
high beams, pull the lever back
lightly, then release it. The high
beams stay on as long as you hold
the lever back.

1.
2.
3.
4.
5.
6.
7.
8.
9.

66

Turn Signal

Headlights

High Beams

Turn Signals and Headlights

140

Main Menu

Table of Contents

Advertising