Acura 2007 RL - Owner's Manual - Manual (Page 258)

Pressing the (
) button allows you to switch
display modes.
Each time you turn the ignition
switch to the ACCESSORY (I)
position, the display mode is in auto.
The screen changes between day
and night modes when you turn the
headlights on and off.
To override the auto mode, select
either day or night mode. This can
be useful if you want to use the
headlights during the day. Be aware
that using day mode at night will
make the screen extremely bright.
This function allows you to turn
or
verbal reminders. Examples
of these reminders include:
Driving with the parking brake on
Driving with the trunk or a door
open
A reminder to fasten the driver’s
and front passenger’s seat belts
To select ON or OFF, turn the
interface knob to the right or left,
then press the interface selector.
To change the color, select Day or
night by turning the interface knob
to the right or left. Press the
interface selector, then turn the
interface knob to select desired color.
Press the interface selector to enter
your choice.
Choose silver metal (factory
default) as the
color to obtain
the best display contrast.
Choose black metal (factory
default) as the
color to
obtain the best display contrast.
Verbal Reminder Setting Display Mode
Display
mode
ON
OFF
Day
Night
Compass System (U.S. model without navigation system)
256
NOTE:
Main Menu Table of Contents