Acura 2007 RL - Owner's Manual - Manual (Page 184)

Auto reverse stops sensing when the
window is almost closed. You should
always check that all passengers and
objects are away from the window
before closing it.
To open the window fully,
push the window switch firmly down
to the second detent, then release it.
The window automatically goes
down all the way. To stop the
window from going all the way down,
pull back on the window switch
briefly.
To close the window fully, pull back
the window switch firmly to the
second detent, then release it. The
window automatically goes all the
way up. To stop the window from
going all the way up, push down on
the window switch briefly.
To open or close the window
partially, push down or pull back on
the window switch lightly to the first
detent, and hold it. The window will
stop when you release the switch.
All window switches also have the
AUTO feature.
If the window runs into any obstacle
while it is closing automatically, it
will reverse direction, and then stop.
To close the window, remove the
obstacle, then use the window switch
again.
The indicators in the switches come
on when you turn the ignition switch
to the ON (II) position.
The power windows have a key-off
delay. You can still open and close
the windows for up to 10 minutes
after you turn off the ignition switch.
The key-off delay cancels as soon as
you open either front door. You must
then turn the ignition switch to the
ON (II) position for the power
windows to operate.
Auto Reverse
AUTO
Power Windows
182
Main Menu Table of Contents