Changing a flat tire – Acura 2007 RL - Owner's Manual User Manual

Page 434

Advertising
background image

Take the tool case out of the spare
tire.

Open the trunk, and fold the trunk
floor forward.

Unscrew the wing bolt, and
remove the spacer cone. Then
take the spare tire out of its well.

If you have a flat tire while driving,
stop in a safe place to change it.
Drive slowly along the shoulder until
you get to an exit or an area to stop
that is far away from the traffic lanes.

Park the vehicle on firm, level, and
non-slippery ground. Put the
transmission in Park. Apply the
parking brake.
If you are towing a trailer, unhitch
it.

Turn on the hazard warning lights,
and turn the ignition switch to the
LOCK (0) position. Have all
passengers get out of the vehicle
while you change the tire.

1.

2.

3.

4.

5.

Models without Michelin PAX System

Changing a Flat Tire

432

SPARE TIRE

TRUNK FLOOR

TOOL CASE

JACK

The vehicle can easily roll off
the jack, seriously injuring
anyone underneath.

Follow the directions for
changing a tire exactly, and
never get under the vehicle
when it is supported only by the
jack.

Main Menu

Table of Contents

Advertising